Volume 53 liters UN55 Interior easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Dimensions  400 x 400 x 330 mm Max. loading of chamber 80 kg Set temperature range in °C min. 5°C above ambient up to +300°C Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Calibration three freely selectable temperature values adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime Convection natural convection Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10 % steps Vent vent connection with restrictor flap Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature Door fully insulated stainless steel door with 2-point locking (compression door lock) Housing rear zinc-plated steel Voltage Electrical load 230 V, 50/60 Hz approx. 2000 W Ambient temperature +5 °C to +40 °C Humidity rh max. 80 %, non-condensing

Set temperature range in °C	min. 5°C above ambient up to +300°C
Temperature	1 Pt100 sensor DIN class A in 4-wire-circuit
Language setting	German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT	SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	the process time does not start until the set temperature is reached
Calibration	three freely selectable temperature values
adjustable parameters	temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime
Convection	natural convection
Fresh air admixture	adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
Vent	vent connection with restrictor flap
Documentation	programme stored in case of power failure
Programming	AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Temperature control	adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system	for fault analysis
Internals	2 stainless steel grid(s), electropolished
Works calibration certificate	Calibration at +160°C
Door	fully insulated stainless steel door with 2-point locking (compression door lock)
Interior	easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume	108 liter UN110
Dimensions W x H x D in mm	w(A) x h(B) x d(C): 560 x 480 x 400 mm
Max. number of internals	5
Max. loading of chamber	175 kg
Max. loading per internal	20 kg
Dimensions	w(D) x h(E) x d(F): 745 x 864 x 584 mm
Housing	rear zinc-plated steel
Voltage Electrical load	230 V, 50/60 Hz
	approx. 2800 W
Voltage Electrical load	115 V, 50/60 Hz
	approx. 1800 W
Country of origin	Federal Republic of Germany
Net weight	approx. 74 kg
Gross weight carton	approx. 99 kg

---