UP100H – Compact Ultrasonic
Laboratory Device
Batavia Lab menyediakan Homogenizer Ultrasonic UP100H dari
Hielscher (Jerman) ini untuk kebutuhan laboratorium Anda demi meningkatkan
kualitas produk-produk yang Anda produksi sehingga kepuasan dan kepercayaan
konsumen terhadap produk Anda terus terjaga. Metode dan teknis yang sederhana
untuk meningkatkan kualitas emulsi dari produk Anda yaitu dengan homogenisasi
ultrasonik, salah satunya menggunakan UP100H. Aplikasi atau penerapan
homogenizer ultrasonik ini sangat luas mulai dari lab dan industri kimia,
biologi, pangan, kosmetik hingga perminyakan. Tidak ada salahnya, dan merupakan
keputusan yang tepat, jika perusahaan Anda mempercayakan proses produksi atau
pun QC dan RnD kepada alat ini, Homogenizer Ultrasonic UP100H, dan kepada Kami
Batavia Lab bersama PT. Sentral Laborindo Pratama sebagai penyedia UP100H.
Berikut sekilas tentang UP100H.
The ultrasonic processor UP100H (100W, 30kHz) is
the perfect device for the sonication of small and medium size lab samples.
This compact, yet powerful, lab homogenizer is commonly used for sample
preparation, such as emulsifying, dispersing, dissolving and cell disruption. The UP100H is a compact yet powerful ultrasonic device
for handheld and stand-mounted operation.The ultrasonic processor UP100H (100
watts, 30kHz) has the same compact and ergonomic design as the UP50H (50 watts,
30kHz) but it comes with twice the ultrasonic power. At 1.1kg, it is lightweight
in the hand. Of course, an operation at a stand is possible, too. The
ultrasonic generator and the transducer are combined in one unit, so that there
are no hassles with connecting cables. One power supply cable – that’s all.
This device is most suitable for the ultrasonication of very small as well as
medium-sized samples. With the use of the sonotrode MS10 the range of
application expands to the sonication of volumes of up to 500ml. Therefore,
this ultrasonic device is mainly used for the preparation of samples in the
lab, such as: emulsifying (mixing of immiscible liquids) dispersing (mixing of
powders into liquids) homogenizing and disintegration cell disruption (lysis)
and extraction deagglomeration of nanomaterials degassing In combination with
the flow cell D7K you can sonicate material in continuous flow, e.g. at 10 to
100mL/min. By this, you can simulate continuous sonication processes in
smallest scale. As the UP100H can be operated 24 hours per day (24h/7d), this
setup could process up to 140L per day (depending on the application). The
optional PC-control may be helpful, if a test record is necessary or to
optimize processes. The UP100H
(100 watts) is commonly used for feasibility testing of ultrasonic
applications.The UP100H is often used for general feasibility studies. For
this, a small sample volume, e.g. 5mL is put into a small vial and is being
exposed to intense sonication for a long time. Since ultrasonic power is put into the sample, the liquid would heat
up quickly, unless cooled by a water bath. As the heat can dissipate to the
cooling bath, the sample can be sonicated for a longer time, e.g. 20 minutes.