Flash Point Pensky-Martens Closed Cup Tester
For flash point determinations of fuels, lubricating oils, liquids
containing suspended solids and liquids that tend to form a surface
film during testing.
Pensky-Martens Closed Cup Flash Tester
• Conforms to ASTM D93 and related specifications
• Choice of electric or gas heating
Determines flash points of a wide range of products by a closed cup
method with two option speed stirring of the sample. Extensively used
in shipping and safety regulations for detection of contamination by
volatile and flammable materials in fuel oils and lubricating oils, and for
characterization of hazardous waste samples.
Smooth operating cover mechanism slides shutter open and applies test flame
at the turn of a knob. Cover fits over brass test cup and includes pilot flame,
test flame reference bead, built-in stirrer and plated brass thermometer ferrule.
Electrically heated model is equipped with a 1000W nickel-chromium
heater with stepless variable control for accurate, repeatable temperature
rate of rise settings per specifications. Heater unit is enclosed in a
stainless steel housing with cooling vents. Includes line cord receptacle
and switch for accessory slow speed stirrer.
Gas heated model has a built-in nickel plated brass natural gas burner, or can
be supplied with an artificial gas burner or liquid propane burner (specify
when ordering). Both models are mounted on a sturdy cast iron base.
Conforms to the specifications of:
ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102;
NF M 07-019
115V 60Hz, Single Phase, 6.5A
220-240V 50/60Hz, Single Phase, 3.4A
Brass Test Cup with Handle
91⁄2 x8x221⁄2 (24x20x57) with optional stirrer motor installed
K16000: 21 lbs (9.5kg)
K16200/K16270: 24 lbs (10.9kg)
Shipping Weight: 30 lbs (13.6kg)
Dimensions: 3.1 Cu. ft.